Product Name: Vinyl Tile Resin
Chemical Family: Vinyl chloride-vinyl acetate terpolymer
Manufacturer: Industry-recognized producer of polymer materials
Use of Substance: Flooring tiles, sheet flooring, adhesives, coatings
Contact Information: Technical support and product safety office, including emergency phone numbers and address
Synonyms: Poly (vinyl chloride-vinyl acetate), VC/VA resin
Recommended Use: Intended for industrial and professional use, not for consumer application
Restrictions: Do not use in food, medicine, or drinking water contact applications
GHS Classification: Not classified as hazardous under GHS as manufactured
Label Elements: No pictogram or signal word required under standard handling
Potential Hazards: Dust generated during processing can irritate respiratory tract, skin, eyes; exposure to hot vapor during processing may release irritating or harmful compounds
Acute Effects: Coughing, sneezing, eye redness, skin dryness; heated material may aggravate asthma or other respiratory issues
Chronic Effects: Prolonged and repeated inhalation of dust may result in lung irritation
Environmental Hazard: Spilled resin can add microplastics to the environment if not properly handled
Chemical Name: Vinyl Chloride-Vinyl Acetate Terpolymer
CAS Number: 25086-48-0 (typical for this class)
Content: 90–98%
Minor Additives: Stabilizers, plasticizers in small percentages for processing ease
Hazardous Components: Resin itself considered non-hazardous in solid form, vinyl chloride monomer (residual) trace level well below regulatory thresholds
Impurities: Typically none present at reportable concentrations
Inhalation: Move person to area with fresh air, provide comfort, seek medical attention for continued discomfort
Skin Contact: Wash thoroughly with soap and water, remove contaminated clothing, treat irritation with moisturizing lotion if dry skin develops
Eye Contact: Rinse gently with clean water for several minutes, keep eyelids open, remove contact lenses if easy, seek medical care if redness persists
Ingestion: Rinse mouth, drink water in small sips, avoid inducing vomiting, consult medical professional
Exposure to Decomposition Products: If exposed to fumes during processing, monitor for chest tightness, cough, shortness of breath; move out of area quickly and seek help if symptoms develop
Suitable Extinguishing Media: Water spray, foam, dry chemical, CO2
Unsuitable Extinguishing Media: None known for general fires involving this resin
Specific Hazards: Thermal decomposition can release hydrogen chloride, carbon monoxide, small amounts of phosgene
Protective Equipment: Full-face self-contained breathing apparatus, chemical-resistant protective clothing
Firefighting Instructions: Evacuate area, fight fire from upwind side, cool containers with water spray, prevent run-off from entering waterways
Hazard Combustion Products: Dense black smoke, acidic gases, possibly dioxins and furans under incomplete combustion
Personal Precautions: Wear dust mask, safety goggles, gloves, wash hands promptly after cleanup
Environmental Precautions: Prevent entry into soil, sewers, drains, watercourses
Cleanup Methods: Sweep or vacuum up spilled resin; avoid creating dust clouds; clean surface with wet cloth if necessary
Containment: Place recovered material in sealable, labeled containers for proper disposal or recycling
Disposal: Dispose of in accordance with local, state, and national regulations, prefer recycling if available
Safe Handling: Minimize dust production by using closed systems, keep containers closed, use ventilation during transfer or mixing, avoid eating or drinking in handling areas
Hygiene Practices: Wash hands and exposed skin after contact, do not wear contaminated clothing home
Storage Conditions: Cool, dry, well-ventilated place; away from sunlight, ignition sources, oxidizing agents
Incompatible Materials: Strong acids, alkalis, oxidizers
Temperature Control: Store below 40°C to avoid material degradation
Exposure Limits: Vinyl chloride polymer itself has no OSHA PEL or ACGIH TLV; check local guidelines for any residual monomer
Engineering Controls: Local exhaust ventilation at point of dust or vapor generation, general area ventilation
Personal Protection: Dust mask or respirator for airborne particles, safety goggles, gloves made from neoprene or nitrile, flame-resistant clothing if handling near open flame
Environmental Controls: Collection and filtration of dust before atmospheric release
General Precautions: Provide handwashing stations and emergency eyewash showers in work areas
Physical State: Fine powder, small beads, sometimes pellets
Color: White to off-white
Odor: Slight, plastic-like
Melting Point: Above 140°C (dependent on specific formulation)
Boiling Point: Not applicable, decomposes before boiling
Flash Point: Not flammable in solid form, but dust can combust
Density: Typical value 1.2–1.4 g/cm³
Solubility: Insoluble in water, soluble in some ketones and esters
Partition Coefficient: Not determined, not expected to transfer to organic phase in normal uses
Vapor Pressure: Negligible at ambient conditions
Chemical Stability: Stable under normal ambient and anticipated storage conditions
Decomposition: Degrades at temperatures above 200°C, releases acidic and toxic gases
Hazardous Reactions: Contact with strong oxidizers can trigger combustion
Polymerization: Not known to self-polymerize
Incompatibility: Avoid contact with heat, flames, strong acids, alkalis, oxidizers
Acute Toxicity: No acute oral or dermal toxicity expected based on polymer structure
Inhalation: Dust irritation to mucous membranes, rare cases of allergic response with repeated contact
Skin Corrosion/Irritation: Minor mechanical irritation, typically resolves after decontamination
Eye Damage/Irritation: Dust can cause redness and watering
Sensitization: Not reported at significant levels for this product
Carcinogenicity: Component resins do not show carcinogenic effects; residual monomer present at far below thresholds
Chronic Effects: Prolonged exposure to dust can aggravate respiratory conditions; no evidence for systemic absorption under typical exposure scenarios
Aquatic Toxicity: Low toxicity to fish and aquatic invertebrates, risk comes from physical accumulation
Persistence and Degradability: Not readily biodegradable, stable polymer persists for years in environment
Bioaccumulative Potential: Not expected to bioaccumulate due to very high molecular weight
Mobility in Soil: Stays mainly close to point of release due to low solubility
Other Ecological Issues: Large spills contribute to plastic pollution, microplastic risk over time
Recommendation: Minimize spills and recover material wherever possible
Waste Disposal: Collect and recycle unused product if facilities exist, landfill as non-hazardous industrial waste if no recycling
Contaminated Packaging: Rinse and recycle or discard as directed by local rules
Special Precautions: Avoid uncontrolled incineration, as it releases acidic hydrogen chloride gas and other hazardous products
Regulatory Categories: Not hazardous waste under most national/international regulations, check local requirements
Water Disposal: Prevent discharge into waterways, as persistent plastics pollute aquatic systems
UN Number: Not regulated for transport
Proper Shipping Name: Not regulated as a dangerous good
Transport Hazard Class: None
Packing Group: None
Special Precautions: Use sealed, clearly labeled containers, protect from moisture and physical damage during transit
Marine Pollutant: Not classified, but accidental spills should be avoided to prevent microplastic spread
International Transport Standards: No restrictions for ground, air, or maritime movement under US DOT, IMDG, IATA codes
OSHA: Not specifically listed as a hazardous material; good industrial hygiene practices required for dust
TSCA: Listed
REACH: Polymeric substance, exempt from some registration duties; comply with SVHC limits for residual monomers
California Proposition 65: Finished resin contains very low residual vinyl chloride; complies with exposure guidelines in finished articles
SARA Title III: Resin does not contain section 313 chemicals at reportable levels
Other Local or National Regulations: Product not considered hazardous, but users should follow workplace exposure standards and good manufacturing practices
Workplace Labeling: Label bulk and transfer containers with product name, hazard information, and handling advice based on occupational safety regulations
