Product Name: M16-53 Resin
Chemical Family: Hydroxyl-Modified Vinyl Chloride/Vinyl Acetate Terpolymer
Recommended Use: Coatings, adhesives, inks
Manufacturer: Contact local supplier or authorized distributor for details
Emergency Telephone: Local emergency service, national poison center, or company contact provided on packaging
Trade Name: M16-53 Hydroxyl Terpolymer
Synonyms: Hydroxyl-modified copolymer resin
Product Code: M16-53
Classification: Not classed as hazardous under GHS, though dust may cause respiratory tract irritation
GHS Label Elements: No pictogram or signal word needed by GHS, dust may prompt precautionary measures
Health Hazards: May irritate eyes, skin, or respiratory system through direct contact or inhalation
Physical Hazards: Fine powders can create a combustible dust-air mixture
Precautionary Statement: Use with local ventilation, avoid dust clouds, minimize inhalation and skin exposure
Other Hazards: Pellet or powder may pose slip hazard on floors
Principal Component: Vinyl chloride-vinyl acetate copolymer
Hydroxyl Content: Typically between 1% and 4% by weight
Vinyl Acetate Content: Ranges from 5% to 15% by weight
Copolymers and Modifiers: Proprietary, content available through manufacturer
Impurities: Trace residual monomers (e.g., vinyl chloride below regulated thresholds)
Inhalation: Move person to fresh air, monitor for cough or breathing issues, seek medical help for symptoms
Skin Contact: Wash with mild soap and water, remove contaminated clothing, see physician for irritation
Eye Contact: Rinse with water for at least fifteen minutes, do not rub, seek help if irritation persists
Ingestion: Rinse mouth, drink water, stay upright, get medical attention for discomfort
Notes for Doctor: Symptomatic treatment recommended, no special antidotes
Suitable Extinguishing Media: Use foam, dry chemical, or carbon dioxide
Unsuitable Extinguishing Media: High-pressure water jet may spread dust
Hazards from Combustion: Generates hydrogen chloride and possibly phosgene in fire, dense smoke possible
Special Firefighting Procedures: Wear self-contained breathing apparatus and protective gear, evacuate area as needed
Fire/Explosion Risks: Finely divided dust may cause explosive mixtures in air
Other Information: Cool containers with water to prevent pressure build-up
Personal Precautions: Use appropriate PPE (gloves, goggles, dust mask), avoid breathing dust
Environmental Precautions: Prevent release into drains, surface water, or soil
Clean-Up Methods: Collect spilled material mechanically, sweep or vacuum up dry, keep dust to a minimum
Waste Disposal: Transfer waste to labeled, sealable containers for disposal in accordance with regulations
Decontamination: Wash area with water after removal of material, ventilate affected space
Additional Advice: Remove all ignition sources, ensure electrical equipment is spark-proof
Safe Handling: Avoid dust generation and buildup, provide adequate ventilation, ground equipment to reduce static
Conditions for Storage: Store in tightly sealed containers away from moisture and incompatible substances
Storage Temperature: Recommended ambient temperature, avoid extreme heat
Packing Materials: Use original, labeled packaging or containers compatible with polymeric materials
Special Requirements: Keep away from oxidizers and strong acids, do not allow cross-contamination
Hygiene Measures: Wash thoroughly after handling, do not eat, drink, or smoke in work area
Occupational Exposure Limits: No specific limits set for product, observe local nuisance dust thresholds
Engineering Controls: Use local exhaust ventilation in case of dust formation
Personal Protective Equipment (PPE): Dust mask or respirator (P2 or N95), chemical safety goggles, gloves (nitrile, neoprene), long sleeves
Hand Protection: Impervious gloves for prolonged contact
Eye Protection: Tight-fitting safety goggles
Skin Protection: Protective clothing, avoid open footwear in processing zones
General Protection: Replace contaminated PPE, inspect equipment regularly, practice regular skin checks
Form: Solid powder or granules
Color: White to off-white
Odor: Faint, plastic-like
pH (suspension): Neutral (6-8)
Melting Point: Softens at approximately 60–85°C
Boiling Point: Not applicable for non-volatile solid
Flash Point: > 400°C
Auto-ignition Temperature: > 450°C
Flammability: Not highly flammable, but fine dust is combustible
Explosive Properties: Dust explosion possible under right conditions
Vapor Pressure: Not applicable
Solubility in Water: Insoluble
Solubility in Solvents: Soluble in ketones, esters, aromatic hydrocarbons
Bulk Density: 0.4–0.7 g/cm³
Vapor Density: Not applicable
Chemical Stability: Stable under standard storage and handling conditions
Conditions to Avoid: Excessive heat, dust clouds, and sparks
Incompatible Materials: Strong oxidizing agents, strong acids, alkali metals
Hazardous Decomposition Products: Hydrogen chloride, carbon monoxide, carbon dioxide, small amounts of phosgene at very high temperatures
Reactivity: No dangerous polymerization expected under normal handling
Other Information: Avoid contact with incompatible chemicals and moisture during storage
Acute Toxicity: Material considered low hazard if used with standard precautions
Skin Contact: May cause mild irritation on prolonged exposure
Eye Contact: Fine dust may irritate eyes
Inhalation: Dust can affect nose, throat, and lungs, particularly in closed or poorly ventilated areas
Ingestion: Harmful effects unlikely in small amounts, but ingestion not recommended
Chronic Effects: Not known to cause sensitization by skin contact or inhalation
Carcinogenicity: Contains residual vinyl chloride monomer below regulated limits, routine workplace controls required
Mutagenicity/Teratogenicity: Not classified based on available data
Ecotoxicity: Not expected to be acutely hazardous to aquatic or terrestrial life in solid form
Mobility in Soil: Essentially immobile due to solid and insoluble nature
Persistent/Bioaccumulative Potential: Polymer structure resists degradation, may persist in environment
Degradability: Degrades slowly under natural environmental conditions
Aquatic Toxicity: No significant short-term effect but can cause physical fouling
Additional Information: Avoid uncontrolled release to waterways or drains to prevent physical accumulation in environment
Waste Disposal Methods: Dispose of through licensed hazardous or industrial waste contractors
Container Disposal: Empty containers may retain product residues, triple rinse and offer for recycling or safe disposal
Special Precautions: Do not incinerate in open air; only by approved facilities due to potential for hazardous fumes
Regulatory Considerations: Follow local, regional, and national laws for disposal; product not considered hazardous waste unless contaminated
Reuse/Recycling: Mechanical recycling possible for uncontaminated material through specialist processors
Advice for Large Quantities: Contact local environmental regulators or company for tailored disposal guidance
UN Number: Not classified as a dangerous good for road, sea, or air transport
UN Proper Shipping Name: Not regulated
Transport Hazard Class: Not applicable
Packing Group: Not regulated
Environmental Hazards: Not a marine pollutant
Special Precautions for User: Maintain packaging integrity, prevent moisture uptake and mechanical damage during loading/unloading
Transport in Bulk: Follow ADR, IMDG, IATA guidelines, ensure label with product identity
EU Legislation: Polymer exempt from REACH registration, residual monomers managed within legal limits
US TSCA: Listed as compliant, vinyl chloride residue must remain under reporting thresholds
OSHA Status: Non-hazardous polymer, observe standard safety practices for nuisance dust
Canadian WHMIS: Not classified as hazardous
Other National Inventories: Product listed or compliant in most major chemical inventories
Labeling: No hazard labeling required under GHS; product label should show trade name and supplier information
Restriction of Use: Product for industrial/professional use only, not for consumer product manufacturing or food contact
Notice to User: End users responsible for compliance with workplace and environmental regulations in site of use
