Product Name: Epoxy Emulsion
Chemical Family: Epoxy Resin Dispersion
Use: Adhesives, Coatings, Sealants
Manufacturer: Typical supplier information (address, phone, emergency contacts)
Synonyms: Waterborne Epoxy Resin Emulsion
Product Code: Assigned manufacturer identification number
Hazard Class: Skin Irritant, Eye Irritant, Sensitizer
Signal Word: Warning
Hazard Statements: Causes skin and eye irritation — May cause an allergic skin reaction — Harmful to aquatic life
Pictograms: Exclamation mark, Environmental symbol
Precautionary Statements: Avoid contact with skin and eyes — Wear protective gear — Wash hands after handling — Prevent release to environment — If skin irritation occurs, get medical advice
Main Components: Epoxy Resin Emulsion (CAS 25068-38-6 or equivalent, 40-65%)
Other Components: Water (20-50%), Non-ionic surfactants (1-5%), Emulsifiers, Additives (less than 10%)
Hazardous Ingredients: Bisphenol A Epoxy Resin — Possible presence of reactive diluents and trace stabilizers
Impurities: Industrial byproducts, often trace oxiranes or related epoxide compounds
Inhalation: Move affected person to fresh air, seek medical advice if breathing difficulties persist
Skin Contact: Remove contaminated clothing and wash skin with soap and plenty of water, seek medical care for persistent irritation
Eye Contact: Rinse eyes gently for several minutes with water, seek immediate medical attention if irritation remains
Ingestion: Rinse mouth, never induce vomiting, get immediate medical attention if feeling unwell or discomfort persists
Most Important Symptoms: Skin rash, eye redness, irritation, delayed allergic reactions in sensitized individuals
Extinguishing Media: Water spray, dry chemical, foam, CO2
Unsuitable Media: High pressure water jets may spread product or foam
Special Hazards: Fumes including carbon monoxide, carbon dioxide, and irritating organic vapors form under fire conditions
Protective Equipment: Firefighters require SCBA and full protective clothing
Recommendations: Remove containers from area if safe, keep out runoff, cool with water spray
Personal Protection: Use gloves, goggles, masks to avoid exposure
Spill Response: Contain spillage with absorbents like sand or earth, prevent product from entering drains or watercourses
Clean Up: Scrape up material into containers; decontaminate area with water and detergent
Disposal: Dispose of in compliance with local, state, and federal regulations
Environmental Precautions: Notify authorities if product enters waterways or sewer systems
Safe Handling: Handle in well-ventilated areas, minimize skin and eye contact, avoid inhalation of vapors or spray
Storage Conditions: Store in tightly closed, original containers in cool, dry, well-ventilated space away from direct sunlight and sources of ignition
Incompatible Materials: Strong acids, bases, oxidizing agents can trigger hazardous reactions
Other Precautions: Keep away from food and drink, practice good hygiene, clean equipment promptly after use
Occupational Exposure Limits: OSHA/ACGIH standards for epoxy resins are not established; use basic industrial hygiene principles
Engineering Controls: Fractionalization and localized exhaust ventilation reduce inhalation risk
Personal Protection: Gloves (nitrile or neoprene), safety goggles, protective clothing, use of respirator in poorly ventilated areas
Hygiene Measures: Wash hands and exposed skin before eating, drinking, smoking; remove soiled clothing immediately
Appearance: Milky to translucent liquid
Odor: Slight, variable, often faintly sweet or chemical
pH: 6.5–8.5 (aqueous)
Boiling Point: >100°C (212°F, limited by water content)
Melting/Freezing Point: <0°C (32°F), product remains liquid at low temperature
Flash Point: Above 100°C (non-flammable as emulsion)
Solubility: Dispersible in water
Vapor Pressure: Low at ambient temperatures
Viscosity: 100–2000 cP at 23°C
Density: 1.06–1.25 g/cm³
Chemical Stability: Stable under recommended storage and handling conditions
Reactivity: Non-reactive under normal working conditions; mixes readily with curing agents
Conditions to Avoid: Extremes of heat, strong acids, bases, oxidizers, freezing temperatures
Decomposition Products: Upon thermal decomposition, releases irritant vapors, carbon monoxide, carbon dioxide, and possible phenolic compounds
Hazardous Reactions: Strong exothermic reaction may occur with amine hardeners if mixed improperly
Acute Toxicity: Low by dermal and oral routes
Skin Sensitization: Can induce allergic reactions in sensitized individuals after repeated contact
Eye Effects: Causes irritation, possible reversible damage from concentrated splashes
Chronic Exposure: Prolonged or repeated exposure can lead to eczema-like dermatitis, respiratory discomfort in sensitive people
Ingestion: Not intended for ingestion; accidental ingestion may lead to stomach upset or more serious harm
Carcinogenicity: Current research shows no evidence of carcinogenic effects from listed components
Aquatic Toxicity: Harmful to aquatic organisms, may cause long-term effects in aquatic environments
Persistence and Degradability: Product degrades slowly in water and soil; the polymer base remains for extended periods
Bioaccumulation: Limited evidence of bioaccumulation but hydrolysis releases non-persistent byproducts
Mobility in Soil: Moderate mobility, epoxies can migrate through soil profile if not immobilized
Other Effects: Large spills have potential for surface water and groundwater contamination
Waste Treatment: Solidify spilled or unused material before disposal
Method: Dispose of at approved hazardous waste facility following local environmental regulations
Container Disposal: Empty drums require thorough cleaning, preferably triple rinsing, before recycling or landfill
Precautions: Do not dump into sewers, watercourses, or untreated municipal waste streams
UN Number: May not be regulated as dangerous goods for transport in small packages; confirm specific shipping classification
Proper Shipping Name: Environmentally hazardous (Epoxy Resin Emulsion) substance as per transport regulations if above threshold
Packing Group: Usually not assigned or III for regulated shipments
Labels Required: Environmental hazard, irritant as applicable
Transport Precautions: Ensure secure, upright loading; prevent leaks; comply with all applicable local, national, and international transport laws
International Inventories: Listed on TSCA, EINECS, AICS, DSL, and other important chemical registers
OSHA Hazard: Classified as hazardous based on irritation and sensitization potential
EPA SARA Title III: Section 313 listing depends on company-specific additives and formulation
REACH: Components pre-registered or fully registered under European REACH regulation
Labeling Guidance: Comply with GHS and national chemical labeling requirements — Ensure SDS compliance with latest legislative standards
Restrictions: Avoid release to environment, adhere to workplace exposure guidelines, ensure full employee training on hazards and safe handling
